The Hover Craft

The Hover Craft model is your fun summer groveler, ridden shorter in comparison to your standard short board. With the wide point forward and a straight outline it holds speed well. A big box tail keeps things nice and loose when up in the lip. This design is probably suited more to a surfer that likes the feel of getting their fins free.
The bottom contours on The Hover Craft are a slight single in the nose entry running into a single under the front foot, a single concave running through the front two fins and a v double behind the back fin which helps the big box tail get on rail and gives extra flip in the rail rocker to fit tight in the pocket while still maintaining speed.

Standard glassing specs for The Hover Craft are
2 – full layers of 4 oz deck. 1 – full layer of 4 oz bottom.

'NOTE: The below matrix chart is only there to serve as a guide. Shaun would love to hear from you personally to discuss customising your board if you have any specific requirements that are not available in the matrix. If you are unsure of what you need Shaun is happy to give you advice on your order. Contact Shaun
The following features can be altered to your needs.
Length, width, thickness, tail type, fin setup (Quad, five fin, etc) (FCS II, FCS fusion,Future), glassing specs, carbon additions, decal colour and decal position.
Shaun rides the hover craft model- 5'7 x 19 1/2 x 2 3/8
Shaun's height- 5'10

 

Size
Width
Thickness
Volume
Select Your Board
5’1
18 1/4
2
19.29
5’2
18 3/8
2 1/16
20.3
5’3
18 1/2
2 1/8
21.35
5’4
18 5/8
2 1/8
21.85
5’5
18 3/4
2 1/4
23.55
5’6
18 7/8
2 1/4
24.08
5’
19 1/8
2 1/4
24.77
5’7
19 1/2
2 3/8
26.76
5’8
19 1/2
2 3/8
27.01
5’9
19 3/8
2 3/8
27.37
5’10
19 1/2
2 1/2
29.31
5’11
19 3/4
2 5/8
31.7
6’0
19 7/8
2 5/8
32.36
6’1
20
2 3/4
34.45
6’2
20 1/4
2 3/4
35.37

twitter
facebook